Wednesday, April 10, 2013
Remote Security
Some remote sentry drones for a project i was working on , they may make their way into a larger project I'm in the planning stages of , if so they will get tricked out like A.R.T.I. was with more detail work.
domestic home version the size of a large Roomba
retail and internal warehouse Size of a small lawn mower
cold weather external, operational to -200 heavy Stun Gun and tranquilizer gun, size of a large lawnmower with wide rubber and steel tracks
all weather, all terrain, large sized lawnmower and large heavy tires similar in function to the Humvee CTIS (Central Tire Inflation System)
And a couple more
Saturday, September 1, 2012
Thursday, April 12, 2012
Tuesday, March 6, 2012
Sunday, November 14, 2010
Some of the non classified things I've been modeling over the last few months using 3DS Max. It's nice to have something to show for my apparent lack of posts. I'm especially happy with the way the Fluke Multimeter 27 came out.
Misc. Chemical Extinguishers
Another Misc. Pressure Canister
Peltor 2 way Communication Ground Crew Headsets
Aircraft 'Muels' above and 'Misc' Service Carts below
Misc. Chemical Extinguishers
Another Misc. Pressure Canister
Peltor 2 way Communication Ground Crew Headsets
Aircraft 'Muels' above and 'Misc' Service Carts below
Fluke Multimeter 27
Tuesday, August 31, 2010
almost ready for the rig
Well A.R.T.I.'s refit is almost finished, I don't get to chip away at it as often as i would like to, just the utility pack and the rig and he will be ready for animations.
Wednesday, January 27, 2010
Friday, January 22, 2010
bringing sexy back?
Since I've been having no end of trouble getting my latest reel to upload to You tube, I figured I'd re render it , and since I'm re-rendering I'm going to rework my older models. I sort have started that with my werewolf, but I've been slow to it, so here's a taste of A.R.T.I.'s rework. I know my modeling instructor will be happy that I'm finally giving my old robot design the attention it deserved...Friday, September 18, 2009
Wednesday, September 9, 2009
Thomas Wulff textures
Maps for my werewolf's new sculpt. Working on the fur system.In the meantime here is a new turntable. Fairly different from the previous version.
Wednesday, September 2, 2009
Pirate Ship Helm
So this is a test compile to see if the render layers and animation will work before I go any further with this scene i'm doing this is the result of 6 H of modeling , revisions, textureing, rig/rig repair, and keyframeing the animation. Rain effects done in After Effects.
Tuesday, September 1, 2009
low poly charater textures
This is a low poly character I modeled using the guidelines for a local game company's modeling test. She (minus room and pine box) comes in at around 5500 polygons counting props with full body as well as clothes and secondary props with turned off visibility for "holster" cycles used Maya and Mudbox she has a normal map as well as a displacement, but currently only the normal is applied.
Monday, August 17, 2009
Tuesday, August 4, 2009
test pirate walk
First test of the Pirate rig. i have to tweak some skin weights that didn't mirror correctly and fine tune the hand controls, but it's a decent start
organic sub
Early pass of the biomechanical sub for an upcomming project, more mudbox has been done and have started tweaking in maya... we'll see how it comes along.Monday, July 20, 2009
Monday, July 13, 2009
Hunley Civil War Sub
Renders of my model of the Hunley. A Civil War sub that was the first to successfully torpedo an enemy ship. These are for the same up comming project as the mudbox work.
Friday, July 3, 2009
New Wulff sculpts
I've been unhappy with my werewolf's head for a while now so I've been toying with a resculpt. Here are some renders of my preliminary resculpt. I think I'm going to adjust the base mesh before I go any further to closer resemble this shape.
I think I'm also going to rotate the hands palms down, the way they are adds too much 'candy wrapper' twist when I animate.
Thursday, July 2, 2009
quarter 7 WIP reel final
So I fixed the audio issue on this reel so you can hear the lipsyncs and background audio.
Here is the end of quarter reel I was cutting together last week. I am curently experimenting with uploading a higher res Modeling reel to youtube, if it works i'll embed it at the top right of the page, with more higher res to follow.
Thursday, June 25, 2009
Frazzled
Working on my end of Quarter reel, may post the rough un edited cut, more likely is the finished one some time early July.
Working on my end of Quarter reel, may post the rough un edited cut, more likely is the finished one some time early July.
Monday, June 15, 2009
Demo Reel WIP
Work In Progress Demo Reel June 2009
So I became inspired today after a seminar I attended, so when I finally made it home I cranked this out in about 3 hours... it needs more detail work and better textures, but it is a good start hope to finish it tomorrow or Sunday at the latest, depends how busy I get with end of quarter work. It's not rigged yet but the screw's pivot is set properly for a test rotation and the rudders on the port and starboard stern fins are also properly pivoted to deflect. The stacks on the tower are place holders until I get the real ones modeled.
My very neglected model of Henry House here in Halifax, I am aiming for full textures by the end of June as soon as I have them done I will post them, and maybe a camera move as well.
Some pics of the Macross Fortress I modeled with updated textures
not quite done but coming along.
This is a scene I'm working on getting perfect for my light rig animation... if I get super ambitious I think I'll try to comp in rolling waves and some audio to go with it.
Other than that aside from a terrible computer crash I've been spending some time with mudbox, zbrush and 3DS MAX. No where as good as maya but getting there.
Turn table Of Wulff, posed this time with blend shapes
Here is a colour test for Wulff just checking my uv map for any strange happenings. Also here is a rendered animation of the great dane walkcycle playblast on my year one reel. Finally I figured i'd put a turntable up for a candlestick holder I modeled last week.
so a little bit of a fur test for Wulff just to see if that's the direction i'll go when I have him finished, if I can get it to comb correctly I think I will. The blade is a short sword i think he'll carry for the purpose of parrying other blades, tooth and claw being his predominant weapons.
here are some things i'm working on
So a while back we modeled Stickfa toys as an intro to character modeling. Mine had an adventurous streak so he 'requisitioned ' a lamp I made for a character I was designing at the time.
I was going for an old copper bullseye lamp combined with the look of an ishi-doro(Japanese stone lantern)
A table setup I did when I was learning about caustic refraction and sub surface scattering, it's not bad, there is some tweaking i'd still like to do, but that is the way life is i guess.
Work In Progress Demo Reel June 2009
So I became inspired today after a seminar I attended, so when I finally made it home I cranked this out in about 3 hours... it needs more detail work and better textures, but it is a good start hope to finish it tomorrow or Sunday at the latest, depends how busy I get with end of quarter work. It's not rigged yet but the screw's pivot is set properly for a test rotation and the rudders on the port and starboard stern fins are also properly pivoted to deflect. The stacks on the tower are place holders until I get the real ones modeled.
My very neglected model of Henry House here in Halifax, I am aiming for full textures by the end of June as soon as I have them done I will post them, and maybe a camera move as well.
Some pics of the Macross Fortress I modeled with updated textures not quite done but coming along.
not quite done but coming along.This is a scene I'm working on getting perfect for my light rig animation... if I get super ambitious I think I'll try to comp in rolling waves and some audio to go with it.
Other than that aside from a terrible computer crash I've been spending some time with mudbox, zbrush and 3DS MAX. No where as good as maya but getting there.
Turn table Of Wulff, posed this time with blend shapes
Here is a colour test for Wulff just checking my uv map for any strange happenings. Also here is a rendered animation of the great dane walkcycle playblast on my year one reel. Finally I figured i'd put a turntable up for a candlestick holder I modeled last week.
so a little bit of a fur test for Wulff just to see if that's the direction i'll go when I have him finished, if I can get it to comb correctly I think I will. The blade is a short sword i think he'll carry for the purpose of parrying other blades, tooth and claw being his predominant weapons.
here are some things i'm working on
So a while back we modeled Stickfa toys as an intro to character modeling. Mine had an adventurous streak so he 'requisitioned ' a lamp I made for a character I was designing at the time.
I was going for an old copper bullseye lamp combined with the look of an ishi-doro(Japanese stone lantern)
I was going for an old copper bullseye lamp combined with the look of an ishi-doro(Japanese stone lantern)
A table setup I did when I was learning about caustic refraction and sub surface scattering, it's not bad, there is some tweaking i'd still like to do, but that is the way life is i guess.
No comments:
Post a Comment